LOC Precision 2.63 PHOENIX

 

 

Loc Precision Phoenix AIM-54C - 2.6" variation of the notorious AIM-54C Phoenix missile. Sporting the new Modular Motor Can for the widest variety of motor configurations. Stock with 4x 18mm motor tubes (A-D) it can easily be switched out for any of the available combinations found here! Using removable rivets you can switch out the configuration at any time! AND the cans are cross compatible with any other 2.6" MMC style kits! New dotted slots and fins for more surface area to secure the fins to the airframe! Much stronger!

Phoenix MMC Specs:
Height: 29.00"
Weight: 16.00 oz.
Diameter: 2.63"
CG: 17.5530" from nosecone tip
CP: 21.2062" (+- 1.41")

Description:

2.56" Slotted Airframe
Polypropylene Nose Cone
24" Parachute
9? Elastic Shock Cord
Kevlar Shock Cord
Fire Resistant Blanket
Recovery Swivel
Screw Eye
18mm Motor Tubes (4)
18mm Engine Blocks (4)
Motor Can Thrust Ring
Motor Can
Motor Can Plastic Rivets
1/8" Laser Cut Upper Fins (4)
1/8" Laser Cut Lower Fins (4)
Launch Lug
Vinyl Decal Set

Includes pre-slotted airframe, laser cut fins and rings, 24" rip-stop nylon parachute and swivel, Kevlar shock cord mount, elastic shock cord, fire protection blanket, recovery swivel, 1/4" launch lugs, AND vinyl decal set.

Notes:
This rocket is recommended for low to intro mid power rocket motors 4xB ? 1xE impulse. Depending on your flying field and finished weight, this is a very versatile kit. Always check stability to ensure stable flight; the Center of Gravity (CG) must be forward of the Center of Pressure (CP) in flight ready condition.